{"id":30070,"date":"2025-11-13T08:15:10","date_gmt":"2025-11-13T08:15:10","guid":{"rendered":"http:\/\/potential4.com.ua\/?page_id=30070"},"modified":"2026-04-29T14:40:29","modified_gmt":"2026-04-29T14:40:29","slug":"rotorni-povitroduvky-typu-ruts-kubicek","status":"publish","type":"page","link":"http:\/\/potential4.com.ua\/en\/obladnannya\/povitroduvky\/rotorni-povitroduvky-typu-ruts-kubicek\/","title":{"rendered":"Roots type rotary blowers \"KUBICEK\""},"content":{"rendered":"
\n\t\t\t\t\r\n\t\t
\n\t\t\t\t\t
\n\t\t\r\n\t\t
\n\t\t\r\n\t\t
\n\t\t\r\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Roots type rotary blowers \"KUBICEK\" (Czech Republic)\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Czech Roots type rotary blowers from KUBICEK VHS are equipment in which external compression of the gas medium is carried out using two rotors with three teeth (piston rotors). The rotors are installed along horizontal axes in the blower housing and rotate in opposite directions. The movement of the piston rotors causes the gas medium to be sucked in on the suction side of the equipment, the gas to be transported to the delivery point, and its compression. The system is equipped with a synchronizing gear with ground helical gears, which ensures the accuracy and smoothness of the rotor rotation. The gearing simultaneously limits the clearance for contactless rollback of the rotors, which therefore do not need to be lubricated, so the lubricant cannot contaminate the gas medium. This is one of the reasons why Roots type blowers from KUBICEK VHS are used in a very wide range of industries.<\/p>

Blowers and blower units supplied by KUBICEK VHS are designed to be as environmentally friendly as possible: the compressed working medium does not contain any contaminants or oils; specially designed casings minimize noise levels.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t

Advantages of KUBICEK VHS blowers and blower units:\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
    \n\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tlow noise level <\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\thigh efficiency <\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tlow operating costs<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\twide range of products with detailed capacity differentiation<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\tpossibility of use \u2013 reduced pressure, excess pressure, two-stage, various environments, Ex, etc.<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
  • \n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t<\/path><\/svg>\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\ttiered placement (one above the other)<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Blower\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    \"\"The blower consists of a housing with a pair of rotors-pistons, two bearings on the sides and two covers with an oil filler, which provides lubrication of the rotor bearings and the synchronizing gear. Penetration of lubricant into the blower housing (the transported medium) is prevented by special dynamic seals. Blowers, as a rule, do not require special cooling - the heat that is generated is removed by the transported medium and, in part, by the surface of the equipment.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    Blower 3D16 \u2013 3D38:\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Blower 3D45 \u2013 3D90:\n\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Blower 3D16 \u2013 3D38 noise protection cover:\n\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t\"\"\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Regulation<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    In rotary blowers, the volumetric flow rate of the suction medium is practically independent of the outlet pressure. Thus, throttling is not permissible. The volumetric flow rate is changed using a multi-pole electric motor or a motor controlled by a frequency converter.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    Blower unit\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    The blower unit consists of a suction silencer with filter, the blower itself, a discharge silencer, a safety or combined start-up and safety valve, a check valve, a flexible discharge pipe insert, an electric motor and a belt drive. The blower sucks air directly from the environment or through a silencer. The unit is mounted on rubber feet.\u00a0

    The blower is driven by an electric motor using V-belts. The units are equipped with standard electric motors with the option of regulation by switching the number of poles or using a frequency converter. For units with a power of up to 2.2 kW, a motor operating on a voltage of 230 V can be used.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    Possible execution options<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    \"\"The company \"KUBICEK VHS\" is able to offer and manufacture at the customer's request any blowers, both standard and completely non-standard, as well as blower units according to the individual requirements of the client.<\/p>

    The company's designers are ready at any time to prepare a solution for the customer that best meets his requirements. Thus, the customer can choose either a standard product or equipment equipped with, for example, a special noise-proof casing, external suction, air suction, etc.<\/p>

    The company offers carefully thought-out equipment, equipped with various options for blowers and units, with electric motors in all possible versions, measurement and control elements, etc. You can choose the material from which the equipment will be made, the mobile or stationary version of the equipment, the layout method - one above the other or two-stage, as well as the color of the equipment.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    Installation and connection<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Installation and commissioning of blowers and blower units is carried out by the company \"KUBICEK VHS\". Authorized installation is important for the smooth operation of the equipment. When operating in machine rooms, sufficient ventilation and air supply for suction must be ensured.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t

    Operation and maintenance\n<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    All equipment of the company \"KUBICEK VHS\" is manufactured with maximum focus on quality, long service life and operational reliability. Before sending to the customer, the equipment undergoes testing and trial operation, so after installation at the destination it can be immediately put into operation. The condition for a long service life and proper operation of blowers and blower units is proper maintenance and service.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t

    \n\t\t\r\n\t\t
    \n\t\t\t\t\t
    \n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Equipment<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\r\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\n\t\t